问题详细描述(症状)

如标题所示。

问题回复解答

可能原因分析

Occasionally a user will set a ‘root’ user password on the PrintNet adapter, and then forget it.

推荐解决方案

打印机类型1:P7000系列。

  • Turn the printer ON, Go [offline], and unlock the front panel (up and down arrow keys at the same time, release).
  • Press all four arrow keys (up, down, prev, next) at the same time, and release.
  • Right arrow to “PRINTER MGMT”.
  • Down arrow, and then right arrow to “E-NET to DEFAULT”.
  • Press [enter].
  • Re-program the IP address information from the front panel. Unfortunately steps 1-5 also clears the IP address information and sets the adapter back to factory defaults.

打印机种类2:SL/T5000”r”系列。

  • Turn the printer ON, Go [offline], and unlock the front panel (up and down arrow keys at the same time, release).
  • Press all four key [Job Select]+[Feed]+[Test Print]+[Cancel] at the same time, and release.
  • Down arrow to “E-NET to DEFAULT”.
  • Press [Enter].
  • Re-program the IP address information from the front panel. Unfortunately steps 1-4 also clears the IP address information and sets the adapter back to factory defaults.

打印机种类3:SL/T4M系列。

  • Turn the printer ON, Go [offline], and unlock the front panel, [Down button] + [Enter] keys at the same time, release.
  • Press all four button keys at the same time, and release.
  • Down button to “E-NET to DEFAULT”.
  • Press [Enter].
  • Re-program the IP address information from the front panel. Unfortunately steps 1-4 also clears the IP address information and sets the adapter back to factory defaults.